PoE Evaluation Boards
Scroll down to see Silvertel Evaluation boards for select PoE Modules using the Product buttons listed below.
PLEASE NOTE : Evaluation Boards are supplied pre-loaded with a sample module. Please ensure that you specify which variant you wish populated into the Evalboard on request or ideally on your PO. Please contact apps.support@silvertel.com for further questions and information.
PoE IEEE802.3af PD & PSE
PoE+ IEEE802.3at PD & PSE
PoE++ IEEE802.3bt PD & PSE
PoE PSE & DC-DC Combined EvalBoard
*Not Recommended for New Designs
PoE Evaluation Boards
Ag9900 Evaluation Board
These are a range of evaluation boards for testing and evaluation of Silvertels ultra-miniature IEEE802.3af Ag9900M SMT package PoE PD modules. It is designed to work with Power Sourcing Equipment (PSE) that supplies power over either the spare pair or the data pair. It is fully compatible with the Ag6100 (and complementary Ag7100) and Ag6400 PSE modules. It can be ordered as one of six options, dependent on the module/output voltage variant fitted, from either Ag9912M, Ag9905M or Ag9903M or with additional over temperature protection fitted, with the MT suffix. Please click on the order codes above, or use the Buy Samples button provided to order boards. The User Manual can also be downloaded below.
Ag9700 & Ag9200 SIL Evaluation Board
This is Silvertels standard low power IEEE802.3af module evaluation board, for testing and evaluation of Silvertel PoE PD modules. It is designed to work with Power Sourcing Equipment (PSE) that supplies power over either the spare pair or the data pair. It is suitable for use with the following products – Ag9205 and Ag9700 Series. Please use the links provided to order boards or download the User Manual.
Ag9312 Evaluation Board
This is an evaluation board, for testing and evaluation of Silvertels Ag9312 only- a 3-input IEEE802.3af PoE PD module. It is designed to work with Power Sourcing Equipment (PSE) that supplies power over either the spare pair or the data pair. It is compatible with the Ag6100 and Ag6400 PSE modules. Please use the links provided to order boards or download the User Manual.
Ag9800 Evaluation Board
These are a range of evaluation boards for testing and evaluation of Silvertels miniature IEEE802.3af Ag9800M SMT package PoE PD modules. It is designed to work with Power Sourcing Equipment (PSE) that supplies power over either the spare pair or the data pair. It is compatible with the Ag6100 and Ag6400 PSE modules. It can be ordered as one of six options, dependent on the module/output voltage variant fitted, from either Ag9812M, Ag9805M or Ag9803M or the version with over temperature protection fitted, with the MT suffix. Please click on the order codes above, or use the Buy Samples button provided to order boards. The User Manual can also be downloaded below.
Ag6130 Evaluation Board
Ag6810 Evaluation Board
EvalAg6810 are intended for testing and evaluation of the Ag6810 PSE modules.
Ag5300/Ag5400 Evaluation Board
EvalAg5300 is intended for testing and evaluation of both the Ag5300 (12V output) and Ag5324 (24V output) SIL PoE+ PD modules only. This evaluation board will work with Power Sourcing Equipment (PSE) that supplies power over the spare pair or data pairs. It is compatible with the Ag6100 and Ag6400 PSE modules. Please use the links provided to order boards or download the user manual.
Ag9330 Evaluation Board
This is an evaluation board, for testing and evaluation of Silvertels Ag9330 only – a 3-input IEEE802.3at PoE+ PD module. It is designed to work with Power Sourcing Equipment (PSE) that supplies power over either the spare pair or the data pair. It is compatible with the Ag6100 and Ag6400 PSE modules. It is only suitable for use with the Ag9330. Please use the links provided to order boards or download the User Manual.
Ag5800 Evaluation Board
The EvalAg5800 is intended for testing and evaluation of the performance of the Ag5800 IEEE802.3bt 4-Pair high power PoE PD module. This evaluation board will work with suitable IEEE802.3bt draft PoE / PoH Power Sourcing equipment (PSE) that are capable of providing power over the spare pair and the data pair, such as the Ag6800 high power PoE PD module. Please use the links provided to buy boards or download the user manual.
Ag5200 Evaluation Board
EvalAg5200 is intended for testing and evaluation of the Ag5200 PoE+ PD module only. This evaluation board will work with Power Sourcing Equipment (PSE) that supplies power over the spare pair or data pairs. It is compatible with the Ag6100 and Ag6400 PSE modules. Please use the links provided to order boards or download the user manual.
Ag5810 Evaluation Board
EvalAg5810 is intended for testing and evaluation of the Ag5810 PoE Ultra PD module only. This evaluation board will work with PoE Ultra and Power Sourcing Equipment (PSE) that supplies power over the spare pair and or data pairs, e.g. Phihong PoE60U. It is fitted with our new low cost and reduced footprint PoE Ultra 60W module the Ag5810. The Ag5510 has been designed to work in conjunction and be fully compatible with the new Ag5810 PSE modules, in applications where the full 60W of PD power is required. Please use the links provided to order boards or download the user manual.
Ag6800 Evaluation Board
The EvalAg6800 is intended for testing and evaluation of the performance of the Ag6800 IEEE802.3bt 4-Pair high power PoE PSE module. This evaluation board will work with suitable 99W PoE / PoH Powered Devices (PD) that are capable of extracting power over the spare pair and the data pair, such as the Ag5800 high power PoE PD module. The Ag6800 can be set to Legacy mode to alow compatability to older High Power PoE Ultra, PoH and UPoE such as the Ag5500 Ag5600 and Ag5610. Please use the links provided to buy boards or download the user manual.
Ag6120 Evaluation Board
This is Silvertels standard evaluation board, for testing and evaluation of Silvertel Single Channel PSE modules. It is suitable for use at 10M/100M/1G and 10G Ethernet (HDBaseT compatible) rates, with the following products – Ag6100S, Ag6110 and Ag6120. It is designed to work with Powered Devices (PDs) (e.g. Ag9700 or Ag5300) that extract power from either the spare pair and or the data pair. Please use the link provided to order and request specific evaluation boards or download the User Manual.
Ag7100 & Ag6100 Combined PSE Evaluation Board
This is Silvertels new EVAL board to cover both the Ag7100 DC-DC converter and it’s frequently associated Ag6100 PSE module. It is designed to allow simple and combined or separate testing and evaluation of both Silvertels Ag6100 PoE PSE module as well as the Ag7100 DC-DC Boost converter. The output of the Ag7100 is linked on the Eval board directly to the input of the Ag6100 as it would be if being used to design a PSE power circuit with 12 or 24V DC input. It is designed to provide a complete Power Sourcing Equipment (PSE) functional power block, with 12 to 27V DC input, and providing up to 40W of PSE output power onto the CAT5/6 cable as an output. Please use the links provided to order boards or download the User Manual.
Ag5700-LPB Evaluation Board
EvalAg5700-LPB are intended for testing and evaluation of the Ag5712-LPB and Ag5724-LPB SMT PoE+ PD modules. Ag5712-LPB provides a regulated 12V DC output and the Ag5724-LPB provides a 24V DC output. The evaluation boards will work with Power Sourcing Equipment (PSE) that supplies power over the spare pair or data pairs. They can also be used in conjunction with Ag6130 or Ag6800 as compatible PSEs. Please use the links provided to order boards or download the user manual.