Ag6120
The Ag6120 is a single channel, small package SIL PSE module, designed to inject power into conventional twisted pair Category 5 Ethernet cables. Ag6120S modules are compatible with IEEE 802.3af POE, 802.3at PoE+ and 802.3bt devices and PD modules (e.g. Ag9800, Ag5300 or Ag5810).
Ag6120 Block Diagram
Key Features & Documents
IEEE802.3af, at & BT compatible
Small SIL Footprint-53mm(L)x 7mm(W)x 14mm(H)
Over Current & Short Circuit Protection
Signature & Class recognition
Programmable Output Supply limit up to 75W
IEEE802.3bt reduced MPS for lower power standby
Very Low Power Dissipation (98% efficient)
Industrial Temperature
Simple integration
Ag6120
Part Number
Output Voltage
Output Power
Samples
For volume quotes for any of these models, contact your local distributor, details can be found here (below):
Evaluation Boards
EvalAg6120 Evaluation Boards
This is Silvertels standard evaluation board, for testing and evaluation of Silvertel Single Channel PSE modules. It is suitable for use at 10M/100M/1G and 10G Ethernet (HDBaseT compatible) rates, with the following products – Ag6100S, Ag6110 and Ag6120. It is designed to work with Powered Devices (PDs) (e.g. Ag9700 or Ag5300) that extract power from either the spare pair and or the data pair. Please use the link provided to order and request specific evaluation boards or download the User Manual.
EvalAg7x61 Evaluation Board
This is Silvertel’s new EVAL board to cover both the Ag7200 DC-DC converter and it’s complementary and frequently associated Ag6100 PSE module.
It is designed to allow simple and combined or separate testing and evaluation of both Silvertel’s Ag6100 POE PSE module as well as the Ag7200 DC-DC Boost converter. With either 5V or 12V nominal DC input, the output of the Ag7200 is linked on the Eval board directly to the input of the Ag6100 as it would be if being used to design a PSE power circuit. It is designed to provide a complete Power Sourcing Equipment (PSE) functional power block, when fitted with both modules, providing up to 40W of PSE output power onto the CAT5/6 cable as an output at either 48V or 57V.
NOTE : Evaluation Boards are supplied pre-loaded with a sample module. Please ensure that you specify which variant you wish populated into the Eval board on request or ideally on your PO.