Ag59600-LPB
The Ag59600-LPB series Power-over-Ethernet (PoE++) modules are designed to extract power from a conventional twisted pair Category 5 Ethernet cable, conforming to the IEEE802.3 PoE standard, with full compatibility with the IEEE802.3bt, IEEE802.3at and IEEE802.3af amendments.
The Ag59600-LPB is pre-configured as a Type 3 Class 6 device, requesting 60W of power from the PSE, with nominal output voltages of 12V or 24V. The high efficiency DC/DC converter can achieve greater than 94% efficiency and
operates over a wide input voltage range with a low ripple and low noise output. The DC/DC converter also has built-in output overload, output short-circuit and overtemperature protection and provides a 1500Vdc (input to output) isolation barrier.
Key Features & Documents
Up to 60W peak and 51W continuous output power (IEEE802.3bt class 6)
94% efficient DC/DC converter
12V and 24V variants available
Excellent Thermal Management
Overload, short-circuit and thermal protection
Small Surface Mount (SMT) footprint - 40mm x 25mm x 16mm
Industrial temperature range
Minimal external components required
Low output ripple & noise
IEEE802.3bt, IEEE802.3at, IEEE802.3af compliant
1500Vdc isolation (input to output)
Silvertel “design-in” Technical Support
Ag59600LPB
Part Number
Output Voltage
Output Power
Buy Samples
For volume quotes for any of these models, contact your local distributor, details can be found here (below):
Evaluation Boards
Ag59600-LPB Evaluation Board